Machine Tool Model | QLM-506M | QLM-508M | QLM-510M | ||
Machining | Max. swing diameter over bed | mm | ∅500 | ∅500 | ∅500 |
Max. swing diameter over camiage | mm | ∅450 | ∅450 | ∅450 | |
Max. turning diameter | mm | ∅420 | ∅420 | ∅420 | |
Interference diameter of adjacent tool machining | mm | ∅200 | ∅200 | ∅200 | |
Max. machining length | mm | 520 | 500 | 480 | |
Max. stroke of Z axis | mm | 550 | 550 | 550 | |
Max. stroke of X axis | mm | 260 | 260 | 260 | |
Max. stroke of Y axis | mm | ±50 | ±50 | ±50 | |
Motor power of Z1 axis | Kw | 3 | 3 | 3 | |
Motor power of Z2 axis | Kw | -- | -- | -- | |
Motor power of X axis | Kw | 2.2 | 2.2 | 2.2 | |
Motor power of Y axis | Kw | 3 | 3 | 3 | |
Rapid traverse of X / Z1 / Z2 axis | m/min | 25 | 25 | 25 | |
Rapid traverse of Y axis | m/min | 15 | 15 | 15 | |
Main-Spindle | Spindle nose | - | A2-5 | A2-6 | A2-8 |
Spindle diameter | mm | ∅170 | ∅200 | ∅230 | |
Bar specification (Standard/Optional) | mm | ∅45 | ∅52(∅65) | ∅75(∅90) | |
Supporting chuck | inch | 6" | 8" | 10" | |
Motor power (continuous / 30min) | Kw | 5.5/7.5 | 7.5/11 | 11/15 | |
Max. speed | rpm | 1500/6000 | 1500/4200 | 1500/3800 | |
spindle motor torque (rate/max) | Nm | 35/47.7 | 47.7/70 | 70/95.5 | |
spindle motor current (continous/30min) | A | 32/48 | 46/64 | 61/71 | |
C-axis resolution | 1/n | 1024/32768 | 1024/32768 | 1024/32768 | |
Sub-spindle | Spindle nose | - | -- | -- | -- |
Spindle diameter | mm | -- | -- | -- | |
Bar specification (Standard/Optional) | mm | -- | -- | -- | |
Supporting chuck | inch | -- | -- | -- | |
Motor power (continuous / 30min) | Kw | -- | -- | -- | |
Max. speed | rpm | -- | -- | -- | |
spindle motor torque (rate/max) | Nm | -- | -- | -- | |
spindle motor current (continous/30min) | A | -- | -- | -- | |
C-axis resolution | 1/n | -- | -- | -- | |
Control system | - | Mitsubishi M80B | Mitsubishi M80B | Mitsubishi M80B | |
Tool | Interface Spec. | - | BMT55 | BMT55 | BMT55 |
Center height | mm | 100 | 100 | 100 | |
Cutter diameter | mm | 330 | 330 | 330 | |
Numbers of tools | pcs | 12 | 12 | 12 | |
Shank diameter of square tool holder | mm | 25 | 25 | 25 | |
Shank diameter of boring tool holder | mm | 40 | 40 | 40 | |
Numbers of driven tools | pcs | 12 | 12 | 12 | |
Driven tool lock | - | ER25 | ER25 | ER25 | |
Driven power of driven tool motor | Kw | 3.7 | 3.7 | 3.7 | |
Max. Torque of power tool motor | Nm | 20 | 20 | 20 | |
Max. speed of driven tool motor | rpm | 6000 | 6000 | 6000 | |
Tailstock | Distance between centers | mm | 600 | 580 | 560 |
Drive Mode | -- | Programmable | Programmable | Programmable | |
Center interface | mK | 4# | 4# | 4# | |
Appearance/Weight | Machine tool appearance | mm | 2850*2110*2090 | 2850*2110*2090 | 2850*2110*2090 |
Machine tool weight | Kg | 5300 | 5400 | 5500 |
Machine Tool Model | QLM-506M | QLM-508M | QLM-510M | ||
Machining | Max. swing diameter over bed | mm | ∅500 | ∅500 | ∅500 |
Max. swing diameter over camiage | mm | ∅450 | ∅450 | ∅450 | |
Max. turning diameter | mm | ∅420 | ∅420 | ∅420 | |
Interference diameter of adjacent tool machining | mm | ∅200 | ∅200 | ∅200 | |
Max. machining length | mm | 520 | 500 | 480 | |
Max. stroke of Z axis | mm | 550 | 550 | 550 | |
Max. stroke of X axis | mm | 260 | 260 | 260 | |
Max. stroke of Y axis | mm | ±50 | ±50 | ±50 | |
Motor power of Z1 axis | Kw | 3 | 3 | 3 | |
Motor power of Z2 axis | Kw | -- | -- | -- | |
Motor power of X axis | Kw | 2.2 | 2.2 | 2.2 | |
Motor power of Y axis | Kw | 3 | 3 | 3 | |
Rapid traverse of X / Z1 / Z2 axis | m/min | 25 | 25 | 25 | |
Rapid traverse of Y axis | m/min | 15 | 15 | 15 | |
Main-Spindle | Spindle nose | - | A2-5 | A2-6 | A2-8 |
Spindle diameter | mm | ∅170 | ∅200 | ∅230 | |
Bar specification (Standard/Optional) | mm | ∅45 | ∅52(∅65) | ∅75(∅90) | |
Supporting chuck | inch | 6" | 8" | 10" | |
Motor power (continuous / 30min) | Kw | 5.5/7.5 | 7.5/11 | 11/15 | |
Max. speed | rpm | 1500/6000 | 1500/4200 | 1500/3800 | |
spindle motor torque (rate/max) | Nm | 35/47.7 | 47.7/70 | 70/95.5 | |
spindle motor current (continous/30min) | A | 32/48 | 46/64 | 61/71 | |
C-axis resolution | 1/n | 1024/32768 | 1024/32768 | 1024/32768 | |
Sub-spindle | Spindle nose | - | -- | -- | -- |
Spindle diameter | mm | -- | -- | -- | |
Bar specification (Standard/Optional) | mm | -- | -- | -- | |
Supporting chuck | inch | -- | -- | -- | |
Motor power (continuous / 30min) | Kw | -- | -- | -- | |
Max. speed | rpm | -- | -- | -- | |
spindle motor torque (rate/max) | Nm | -- | -- | -- | |
spindle motor current (continous/30min) | A | -- | -- | -- | |
C-axis resolution | 1/n | -- | -- | -- | |
Control system | - | Mitsubishi M80B | Mitsubishi M80B | Mitsubishi M80B | |
Tool | Interface Spec. | - | BMT55 | BMT55 | BMT55 |
Center height | mm | 100 | 100 | 100 | |
Cutter diameter | mm | 330 | 330 | 330 | |
Numbers of tools | pcs | 12 | 12 | 12 | |
Shank diameter of square tool holder | mm | 25 | 25 | 25 | |
Shank diameter of boring tool holder | mm | 40 | 40 | 40 | |
Numbers of driven tools | pcs | 12 | 12 | 12 | |
Driven tool lock | - | ER25 | ER25 | ER25 | |
Driven power of driven tool motor | Kw | 3.7 | 3.7 | 3.7 | |
Max. Torque of power tool motor | Nm | 20 | 20 | 20 | |
Max. speed of driven tool motor | rpm | 6000 | 6000 | 6000 | |
Tailstock | Distance between centers | mm | 600 | 580 | 560 |
Drive Mode | -- | Programmable | Programmable | Programmable | |
Center interface | mK | 4# | 4# | 4# | |
Appearance/Weight | Machine tool appearance | mm | 2850*2110*2090 | 2850*2110*2090 | 2850*2110*2090 |
Machine tool weight | Kg | 5300 | 5400 | 5500 |
QLM-M series
* The machine integrates multiple functions including turning, milling, boring, and tapping, and combines C axis, Y axis and spare axis, which effectively reduces the produce changeover time, avoid artificial error, and simplify the fixtures.
* Adopt standard automatic receiver, optional automatic feeder, and chip cleaner to improve machining efficiency.
* QLM series machine adopts orthogonal Y-axis design, which has higher precision than the difference-compensated Y-axis design. The Y-axis stroke reaches 100mm. It has strong machining capability and low interference.
* Because of the Y-axis function, the machining mode of QLM series products is in the same way as a machining center equipped with a fourth-axis rotary table. (X,Y, Z axes are the same as the X, Y, Z axes of the machining center, and C axis is the same as the four axis rotary table);
* The integration of turning machine and machining center into a machine tool will greatly save manpower, reduce machining time, floor area and the purchase cost of machine tools and fixtures, as well as reducing various uncertainties caused by multiple times of clamping and handling of workpieces.
Base
Self-designed integrally formed rigid structure
Add specific trace elements to improve stability
30-degree inclined bed
Easy for chips removal, close-distance operation, and handling
BMT Driven Tool Turret Series
Achieve a quick tool change for a cycle (1# to 12# tools) within 8 seconds.
Have more stable tool locking mode, a repeatability of +/-0.002mm, and positioning accuracy of +/- 0.005mm.
Have a driven tool holder speed of up to 6,000 rpm, providing a better torque and machining efficiency.
Have a perfect U-shaped design to make center of gravity more concentrated and realize higher stability and higher precision.
Have a dual-motor design to realize fast two-way tool selection and forward and backward machining.
Adopt three-piece clutch locking device to provide extremely strong hydraulic locking force.
CNC system
The Mitsubishi system is the best choice to provide you with stable multi-axis combined machining, and it can optimize your product process while ensuring better product consistency, improving your machining efficiency.
Meanwhile, its after-sales service is as timely and efficient as expected by Jhenjet Intelligent.
Spindle
The spindle is supported by front three and rear two roller bearings to improve the rigidity of the spindle and reduce the runout of the spindle.
The spindle has a strong hydraulic clamping force to facilitate the replacement of collets and chucks.
Screw rod and guide rail
The screw pitch in X and Z directions is perfectly matched to create a more perfect appearance effect and an excellent rapid feeding.
The machine be is integrated cast high-rigidity bed with high precision and high stability, achieving sound chip removal and cleaning.
It adopts imported grade C2 ball screw rod, Grade P roller guide rail, and spindle support by front three and rear two bearings.
Hydraulic System
Korea or Japanese hydraulic system is adopted to improve equipment stability.
QLM-M series
* The machine integrates multiple functions including turning, milling, boring, and tapping, and combines C axis, Y axis and spare axis, which effectively reduces the produce changeover time, avoid artificial error, and simplify the fixtures.
* Adopt standard automatic receiver, optional automatic feeder, and chip cleaner to improve machining efficiency.
* QLM series machine adopts orthogonal Y-axis design, which has higher precision than the difference-compensated Y-axis design. The Y-axis stroke reaches 100mm. It has strong machining capability and low interference.
* Because of the Y-axis function, the machining mode of QLM series products is in the same way as a machining center equipped with a fourth-axis rotary table. (X,Y, Z axes are the same as the X, Y, Z axes of the machining center, and C axis is the same as the four axis rotary table);
* The integration of turning machine and machining center into a machine tool will greatly save manpower, reduce machining time, floor area and the purchase cost of machine tools and fixtures, as well as reducing various uncertainties caused by multiple times of clamping and handling of workpieces.
Base
Self-designed integrally formed rigid structure
Add specific trace elements to improve stability
30-degree inclined bed
Easy for chips removal, close-distance operation, and handling
BMT Driven Tool Turret Series
Achieve a quick tool change for a cycle (1# to 12# tools) within 8 seconds.
Have more stable tool locking mode, a repeatability of +/-0.002mm, and positioning accuracy of +/- 0.005mm.
Have a driven tool holder speed of up to 6,000 rpm, providing a better torque and machining efficiency.
Have a perfect U-shaped design to make center of gravity more concentrated and realize higher stability and higher precision.
Have a dual-motor design to realize fast two-way tool selection and forward and backward machining.
Adopt three-piece clutch locking device to provide extremely strong hydraulic locking force.
CNC system
The Mitsubishi system is the best choice to provide you with stable multi-axis combined machining, and it can optimize your product process while ensuring better product consistency, improving your machining efficiency.
Meanwhile, its after-sales service is as timely and efficient as expected by Jhenjet Intelligent.
Spindle
The spindle is supported by front three and rear two roller bearings to improve the rigidity of the spindle and reduce the runout of the spindle.
The spindle has a strong hydraulic clamping force to facilitate the replacement of collets and chucks.
Screw rod and guide rail
The screw pitch in X and Z directions is perfectly matched to create a more perfect appearance effect and an excellent rapid feeding.
The machine be is integrated cast high-rigidity bed with high precision and high stability, achieving sound chip removal and cleaning.
It adopts imported grade C2 ball screw rod, Grade P roller guide rail, and spindle support by front three and rear two bearings.
Hydraulic System
Korea or Japanese hydraulic system is adopted to improve equipment stability.
Copyright © 2022 Jhenjet Intelligent Technology Co., Ltd. All Rights Reserved. Privacy Policy I Sitemap | Support By Leadong